Line Pressure 600 to 800 BAR, limited ICE torque is limited by the frequency of rotation of the internal combustion engine.Ĭomparing the differential pressure sensor of exhaust gases Not Available return flow of fuel is possible to open the pressure relief valve, the failure of the engine. Lack values or incorrect values from the sensor, The output stage is turned off, the ICE operates with a line pressure of 800 BAR, the internal combustion engine rotational speed is reduced, the torque is limited to the internal combustion engine, the failure of the engine.Ĭheck for open circuit and power supply wires and the masses. The output stage is disabled, internal combustion engine speed is reduced, the failure of the engine. The output stage is disabled, internal combustion engine speed is reduced, an electrical failure. It stops the internal combustion engine malfunctionĬhecking on the output stage circuit and for open wires and power supply. Imitation of the charge air pressure in an equivalent electrical failure. The pressure sensor after the charge air intercooler in the intake manifold The high or low voltage at the idle sensor ICE The correctness of the main pressure sensor readingsĬhecking the pressure reduction is stopped when the internal combustion engine to the pressure level in the atmosphere. ICE torque limit rotation failure of the engine. Sensor supply low-pressure fuel, combustion air and oil pressure.Ĭheck for an open circuit and the power supply wires and weightsĬharge air pressure value can not be adjusted. The engine continues to work with 800 BAR line pressure, torque limit ICE rotation failure of the engine. High or low temperature, poor contact of the signal line, the wrong signal.Ĭontacts check validation rate of change of the exhaust gas temperature.Ĭheck for an open circuit and the power supply wires and the masses. Contacts check validation speed change differential pressure of exhaust gasesĬheck contacts, validation rate of change of the charge air temperature.